What are the functions of a double-layer roll forming machine's control system?

First, the control system for a double-layer roll forming machine is available in manual and automatic modes. Manual operation uses inching to load the steel plate and perform zero-position calibration. Automatic operation allows the system to automatically form and shear the steel plate.

Second, during operation, the double-layer roll forming machine should fully consider its ability to automatically detect the presence of material on the uncoiler. Generally, the system design should meet the following requirements: When there is material on the uncoiler, the machine continues to operate; when there is no material, the machine issues an alarm and automatically shuts down.

Third, the operating speed of the double-layer roll forming machine should be properly controlled and managed based on production needs. Typically, a frequency converter can be used to adjust the speed of the double-layer roll forming machine.

Fourth, the control system should ensure that the double-layer roll forming machine can cut to standard lengths during operation. Users can set the cutting size and quantity on the touch screen and adjust parameters according to specific needs.

Finally, cutting accuracy must be guaranteed during the design of the double-layer roll forming machine's control system. Generally speaking, the cutting accuracy should be controlled within a certain range, and the cutting tolerance should not exceed 0.1 mm. The control system design of the double-layer cold roll forming machine mainly includes the control part, input mode and output mode.